METAL BRITE HD______25L
আমাদের যে কোন পণ্য অর্ডার করতে কল বা WhatsApp করুন
Unitor™ METAL BRITE HD™ is a liquid detergent compound containing phosphoric acid and non-ionic surfactants, used for rust removal and as a surface brightener.
Product information
Unitor™ METAL BRITE HD™ is a non-flammable rust and metal tarnish remover. It is highly concentrated and very economical in use.
Features
- Does not contain nonyl phenol ethoxylates or other estrogenic compounds
- Economical in use
- Non-flammable
- Surface brightening including aluminium
Benefits
- Cleans and passivates ferrous metal surfaces, inhibits further corrosion, and gives a base which paint will adhere
- Approved by the Norwegian Institute of Public Health for use as cleaner of tanks in contact with cooking oil
- Removes light rust and rust stains
- Removes tarnish from non-ferrous metals
- Removes rust stains from painted, ceramic and wooden surfaces
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-11 |
|---|
Physical properties
| Appearance | Light yellow |
|---|---|
| Density [g/ml] | 1,3 |
| Form | Liquid |
| pH | 2 in 1% solution |
Technical data
| Not Compatible | Long term exposure may lead to corrosion of mild steel, cast iron, aluminium and alloys, brass, tin or galvanized material. |
|---|---|
| Volume (l) | 25 |
Approvals
- This composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V and may be discharged into the sea when used to clean cargo holds and external surfaces on ships.
- Approved by the Norwegian Institute of Public Health for use as cleaner of tanks in contact with cooking oil.
Directions for use
Dosing method
Unitor™ METAL BRITE HD. should always be used in a plastic bucket.Always watar add in acid, never the reverse. Remove dirt, rust flakes, oil and grease prior to using Unitor™ METAL BRITE HD.
Apply Unitor™ .METAL BRITE HD to surfaces to be cleaned or pickled as follows:
For severely corroded surfaces and pickling of welding repairs, use 50% solution to neat.
For less severely corroded or soiled surfaces and tarnish on copper and brass, use a solution of 20–50%, and rinse off surface after 15–40 minutes with water.
On aluminium, use a solution of 10–30%, but rinse off surface maximum 5 minutes after application.
For removing of rust stains on painted surfaces, a solution of 10–30% should be sufficient. Rinse off with water 15–20 minutes after application.
For removal of rust stains on ceramic tiles, enamels, porcelain, glass etc., use a solution of 20–50%, depending on stains and soiling. Rinse off with water after 20–40 minutes.
For removal of light rust and scale in pipelines and tanks, recirculate a solution of 5–10% Unitor™ METAL BRITE HD. For discoloration of stainless steel and epoxy coated tanks use the same method.
Removing of white residues from epoxy-coatings that sometimes remains after carriage of Stearin, Olein, Palm fatty acid etc., recirculate a solution of 5–10% Unitor™ METAL BRITE HD. When injected, use a 5% solution. Recirculate or inject until residue is remove.
You must be logged in to post a review.
Inside Chittagong within 02 working days & Outside Chittagong within 3 to 5 working days.
Inside Chittagong delivery Charge is 80 Taka, Outside chittagong Delivery Charge is 150 Taka
Kindly note that, as per our policy, no product returns will be accepted after delivery. Please inspect the items in front of our delivery personnel for your satisfaction.
Reviews
There are no reviews yet.